Voxalot / SIP Broker Support Forums

Voxalot / SIP Broker Support Forums (https://forum.sipbroker.com/index.php)
-   Voxalot General (https://forum.sipbroker.com/forumdisplay.php?f=14)
-   -   Use 1 sipprovider from different locations (https://forum.sipbroker.com/showthread.php?t=2829)

sigmacom 02-22-2008 10:58 AM

Use 1 sipprovider from different locations
 
Hi,

I want to use one SIP provider account for people at different locations. On incoming calls all the phones on all the locations have to ring and the first one that pick's up the phone has the call.
Normally this can not be done (as far as I know) but maybe this can be done with Voxalot ? Who can answer this?

Regards,
Christian

kurun 02-22-2008 01:43 PM

You can have multiple SIP devices registered to the same Voxalot account.
The devices can be in the same location or at different IP address locations.

I use such a configuration with 2 devices registered with no problem.

If used behind the same piblic IP address, NAT issues and port conflicts will very likely have to be resolved (Offsetting SIP and RTP ports, and possibly port forwarding of the same ports to the specific devices).

gotalkvoip 03-20-2008 02:00 PM

Quote:

Originally Posted by sigmacom (Post 15478)
Hi,

I want to use one SIP provider account for people at different locations. On incoming calls all the phones on all the locations have to ring and the first one that pick's up the phone has the call.
Normally this can not be done (as far as I know) but maybe this can be done with Voxalot ? Who can answer this?

Regards,
Christian

I could be wrong but don't think you could ever have all phones ringing from one account as only one can ata can register to answer a call,. funny sounds like your setting up a call center,.

well i had the same idea and you could have multiple basic VSP accounts and have a call forward on no answer in series to every account until someone picks up :-), best solution i can think of,..

emoci 03-20-2008 05:10 PM

Quote:

Originally Posted by gotalkvoip (Post 15871)
I could be wrong but don't think you could ever have all phones ringing from one account as only one can ata can register to answer a call,. funny sounds like your setting up a call center,.

well i had the same idea and you could have multiple basic VSP accounts and have a call forward on no answer in series to every account until someone picks up :-), best solution i can think of,..

With VoXalot you can have the same account registered in many ATAs....when someone calls, all of them will ring, the first to answer takes the call....your best bet is to try it:)

Preferably though you want to avoid having two ATAs behing the same NAT (such they they both have the same public IP), since this gets a bit tricky for your router to handle (in simple terms it means you probably don't want to have these two ATAs both at your place, but one at the home, one at the office, and another one elsewhere should be fine

satphoneguy 03-22-2008 11:12 PM

Quote:

Originally Posted by sigmacom (Post 15478)
Hi,

I want to use one SIP provider account for people at different locations. On incoming calls all the phones on all the locations have to ring and the first one that pick's up the phone has the call.
Normally this can not be done (as far as I know) but maybe this can be done with Voxalot ? Who can answer this?

Regards,
Christian

you can register multiple ATA's to voxalot and should not be a problem. but remember that most DID/VSP account only allow 2 simultaneous incoming calls. it tends to be a bit expensive for extra 'trunks' for more simultaneous calls. outbound on the other hand should not be an issue if there are no promotional 'free' minutes involved with most providers.

spg


All times are GMT. The time now is 04:20 AM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.