Voxalot / SIP Broker Support Forums - Voxalot.com down and no service either

Voxalot / SIP Broker Support Forums (https://forum.sipbroker.com/index.php)

- Voxalot Support (https://forum.sipbroker.com/forumdisplay.php?f=4)

- - Voxalot.com down and no service either (https://forum.sipbroker.com/showthread.php?t=2435)

Quote:

Originally Posted by Kim-Bjoern (Post 13559)

I wonder if I picked the right thread

But since yesterday my GXP2000 Grandstream has been unable to register with Voxalot so I cannor receive incoming calls anymore

Kim

Hi Kim,

All servers are fully operational. I would suggest re-booting your device.
.

Quote:

Originally Posted by martin (Post 13560)

Hi Kim,

All servers are fully operational. I would suggest re-booting your device.
.

Hi Martin,

I should have mentioned in my post I allready tried that several times. However - all of a sudden I remembered having had the same issue with my Linksys ATA 2102 - one of the ports wouldn't register no matter how often it got rebooted. Even thouogh they were setup towards the same VSP. Then I rebooted the ZyXEL D600 D1 router - after that it worked. Same solution for my Grandstream GXP2000. The funny thing is that the three other SIP account in it registered okay. Does anyone have a hint what is causing this to happen? Would the ZyXEL behave as an automated firewall or could it be some embedded Stun server settings somewhere?

Kim

Kim,
I have been having similar problems with a GXP2000 upgraded to the latest firmware 1.1.4.18. The problems seemed to start after I upgraded. I plan to test again with the earlier firmware, but have not had a chance. I have switched the registration to a GS BT102 for now, and it works quite reliably.
So the problem is probably not a Voxalot issue.
If you are using an earlier revision of the firmware, I suggest you keep it that way for now.
In my setup, I am using a Linksys WRT54GS router feeding an HT-496 and the BT102.