Voxalot / SIP Broker Support Forums

Voxalot / SIP Broker Support Forums (https://forum.sipbroker.com/index.php)
-   Voxalot Support (https://forum.sipbroker.com/forumdisplay.php?f=4)
-   -   C450IP does not ring on incoming calls. (https://forum.sipbroker.com/showthread.php?t=1065)

pranzo 02-18-2007 09:39 PM

C450IP does not ring on incoming calls.
 
I have this problem using C450IP with VoXaLot.
The SIP registration went successfully. The echo test was OK.
But the phone does not ring on incoming calls sent to: sip:mynumber@voxalot.com.
The strange thing is that if I launch SJphone (registered at VoXaLot) on my pc, then incoming calls ring both on SJPhone and on C450IP.

I suppose that my configuration of C450IP is partly not correct or incomplete.
Can you help me?

I have tried many combinations. The last one is:

Authenticated name: mynumber
Authenticated password: mypassword
Confirm authenticated password: thesameasabove
Username: mynumber
Domain: eu.voxalot.com
Displayed name: myname
Proxy Server: eu.voxalot.com
Proxy Server port: 5060
Registrar Server: eu.voxalot.com
Registar Server Port: 5060
SIP Port: 5060
RTP Port: 5004
Random Port: No
Use Stun: yes
STUN Server: stun.voxalot.com
STUN Port: 3478
NAT Refresh Period: 20 sec
Proxy Outbound mode: never
Outbond Proxy: eu.voxalot.com
Outbond Proxy Port: 5060
VoIP Volume: normal
Use Annex B for G729: No
Select codecs: G729, G711 a law, G711 m law, G726

martin 02-18-2007 10:28 PM

Your settings look fine. The only thing I would change is the "Domain" to voxalot.com. The proxies are fine as they are.

A couple of things to try:

1. Turn off STUN, re-register the device and try again.
2. Test the inbound call via one of the SIP Broker access numbers http://www.sipbroker.com/sipbroker/action/pstnNumbers

pranzo 02-18-2007 10:42 PM

Quote:

Originally Posted by martin (Post 5631)
Your settings look fine. The only thing I would change is the "Domain" to voxalot.com. The proxies are fine as they are.

A couple of things to try:

1. Turn off STUN, re-register the device and try again.

Ok, now it works fine. Thanks very much for your attention.


All times are GMT. The time now is 02:12 AM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.