SIPME issues... with sipbroker, but not voxalot?
Hi,
I have had troubles getting eyebeam [x-ten pro] working properly with SIPME behind a NAT firewall. Today I discovered that I can use voxalot as a registered VSP on my 7402vgo to call my software phone and I haven't forwarded any ports. However, when I use sipbroker as a gateway also on my 7402vgo, the call gets established but no sounds are passed between each end point. The 7402vgo sipbroker gateway seems to be fine otherwise as I can do an echo test at FWD **393613. The monkeys message works too with **266300. Any ideas why **320 1777mmmmm won't work on my 7402vgo sipbroker gateway entry? NB: I have a VoIP dial plan to replace ** with * and use the sipbroker gateway entry. Kind Regards AndrewM |
Does going direct to SIP Broker work?
Edit: Re-read the original post |
Quote:
|
Sorry, I edited my original post after a re-read your post. Can I confirm:
1. You are dialing sipme via VoXaLot and it is not working? 2. If you dial sipme via SIP Broker direct whether it works or not? |
Quote:
**3201777nnnnnn - software phone rings, I answer, cannot pass audio either way. If I use voxalot simply as follows: 3201777nnnnnn - software phone rings, I answer, all okay. [dial plan details -> _320X. -> ${EXTEN:3} -> SIPME] So I am actually using SIPME to call SIPME, but through my voxalot registered account. Is that clear enough? A. Edit: If I use *320 1777nnnnnn with voxalot, it behaves the same as when I use sipbroker. |
Yep I think my original post re: RTPProxy was in fact the answer.
Just one more question: Does dialing *3201777nnnnnn via VoXaLot (not using SIPME provider in dial plan) give you 2 way audio? |
Quote:
|
I recall wildbill had a similar problem with VoXaLot and sipme and melbournelees gave him the answer (somewhere in the forum).
|
The solution suggested by Lee for me was to remove all Sipme reference from the ATA (in my case a Sipura SPA3000) and register Voxalot as the proxy and then via Sipme through the Voxalot dial plan feature -before I had Voxalot as a gateway and Sipme as my ATA registered VSP - this worked for me and I can now make PSTN and Voip calls through Voxalot/Sipme - Bill
|
Quote:
How are you receiving your inbound calls from SIPME? Can you call forward them to VoXaLot? What is SIPME like as a VSP? Matt |
All times are GMT. The time now is 11:14 AM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.