MWI Update Interval
Hi Everyone
Right now I'm getting the MWI when a Voicemail message is left in my Voxalot VM, but there is a 3 to 5 minute delay before the MWI comes on and a 3 to 5 minute wait after the message is clear. Is there a way to control this interval in my Hard/Softphone settings? Thanks in advance Richard |
Quote:
The proper setting (if any) on other adapters (and all softphones) is left as an exercise to the student. ;) |
Hi DracoFelis
On my Sipura Adapters, the VMWI Refresh Intvl is set to "0" If this means that it "Never" refreshes, I'm just wondering why it does update the status every 3 to 5 minutes? Any recommended level, 30 seconds, 60 seconds? I'm assuming the value is in seconds. Thanks for your help. Richard |
Quote:
. |
Hi Martin
Thanks for the update. Quite understandable. Should I leave the internval at 0 or 30 seconds or does it not really matter? Both 0 and 30 seems to take the same amount of time to update. Richard Quote:
|
Quote:
It wont make any difference as the servers control the interval. . |
Quote:
For any non-zero value of "VMWI Refresh Intvl:", LinkSys/Sipura adapters will send the current state of the VM to your phones every X seconds. Set it to whatever you like (I have mine set to 300). By setting a non-zero value, the phones in your house never risk getting their VM light "stuck" in the wrong state, as the adapter will "refresh" the state info every X seconds. However, if/when you use a non-zero "VMWI Refresh Intvl:" setting, be sure to also use "VMWI Ring Splash Len: 0" (on the "Line x" tab), or you might end up with your phone chirping every X seconds, like clock work. ;) |
Great Info!!! Thanks Dracofelis
Quote:
|
Never goes off
I have the same problem on voipfone.co.uk, so maybe it is a problem with the phone (or voxalot uses some of the same software), but once the MWI turns on, it never seems to turn off again.
The phone is an SPA-941. There is no setting for VMWI Refresh Intvl. Currently the indicator is on, it has been on for the last 12 hours. I can confirm that there are no messages waiting for me. Even restarting the phone does not clear the indicator. Any suggestions? |
Quote:
Something that's been helpful is the Voice Mail Server setting (filling us.voxalot.com there) has since stopped the MWI from staying on non-stop... This is what I'm referring to Setting up Linksys PAP2 - Voxalot FAQ See if you have any luck finding a similar setting on the SPA-941..... |
All times are GMT. The time now is 10:55 PM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.