HowTo: Accessing VoXaLot From A Regular Phone
Here are some instructions on howto call your VoXaLot number and voicemail from a regular fixed line or mobile phone.
To call your VoXaLot number: 1. Call one of the SIP Broker PSTN access numbers: www.sipbroker.com/sipbroker/action/pstnNumbers 2. At the voice prompt, dial *010 xxxxxx (*010 is the VoXaLot SIP-Code. See http://www.sipbroker.com/sipbroker/a...iderWhitePages, and xxxxxx is your VoXaLot number) 3. This will ring your VoXaLot phone / device. To access your voicemail: 1. Call one of the SIP Broker PSTN access numbers (as above). 2. At the voice prompt, dial *010 500 (500 is the voicemail service number. See FAQ) 3. When prompted enter your 6 digit VoXaLot number and pass code. Note: There are currently over 200 access numbers in over 19 countries around the world. |
Sipbroker PSTN numbers for Regional areas
Hi Martin, are there any plans to add Sipbroker numbers to regional areas in Australia?
|
Hi Hally,
The numbers are usually sponsored by VSP's. So if there is an Australian VSP that approaches us to sponsor some regional numbers, we will be more than happy to accommodate. |
Quote:
dial *010 xxxxxx if the number is on the american server dial *031 xxxxxx if the number is on the european server dial *061 xxxxxx if the number is on the australian server It would be easier that there's is only one server (that will dispatch to the 2 other if needed). But is maybe not so easy to implement. Olivier |
Quote:
|
Quote:
Thanks very much, this "feature" is really cool :) So we don't have to remember 3 prefixes ! I also note you do a great job with one unique SIP URI independentel from the 3 servers ! I really apprciate your work, and more often when I see some providers ho only think that VoIP is only to call PSTN numbers.... |
Martin
Is there a way to dial into your account from PTSN and then dial from inside your voXalot account using the registered providers, as if you are dialing from an ATA voXalot registered phone? |
Not yet, but it is on the agenda and it _may_ not be too far away.
|
If you do introduce this feature, it would be really great if we could register a mobile number (or two) so that when that number was used to dial SIPBroker, we wouldn't have to login to our account at all, but could just simply dial straight out again on voxalot account. That is to say, the called ID logs you in automatically in the same way as voicemail is accessed from a voxalot registered SIP phone. Does that make sense?! Voipbuster already have this feature which is awesome, but has no dial plan, least cost routing etc.
|
CLIDs (multiple) is already part of the plan for automatic authentication; it may also be a setup that doesn't answer the call, but calls you back via your dial plan.... such feature may end up being a premium feature though. Time will tell.
|
All times are GMT. The time now is 03:42 AM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.