Incoming stopping after 1 ring?
 

Hi all.
I've setup my netcomm V85 to connect to au.voxalot.com successfully.
I have Oztell setup as a provider as sip2.syd.net2max.com. It is active, and registered.
Outbound I have no problems whatsoever, and if I register the phone directly with Oztell, I don't have any inbound problems.

However when the handset is registered with voxalot, and I have an inbound call into Oztell, down through VoxALot, to the handset, the phone rings once, and then hangs up and it registers as a missed call.
On the outbound handset, its a silent line.

V85 settings:
protocol: G729
reg expire: 900
rtp packet interval: 40ms
sip domain name && proxy addr: au.voxalot.com

oztell settings:
voxalot registered in the web dialer for outbound.

firewall settings:
UDP and TCP port 5060 forwarded to my phone.

Also, the connection between my V85 phone and voxalot seems to disconnect every 5 minutes? whats the go?

Thanks,
Brian

I have the same situation.

Outbound calls are OK.
All incoming calls stop after 1 ring.

I did a test. Called the Toronto sipbroker PSTN gateway 416-548-4739 from my cell, then typed in my voxalot number *010777771, my voxalot phone ringed 1 time then stopped. From my cellphone, I heard 1 ring tone before going to voicemail "The person's extention 777771 is unavailable".

My voxalot is registered at us.voxalot.com. I have tried both outbound proxy and stun server for voxalot and all got the same thing.

Any body got an idea? Thanks in advance.

I just did another test.

My cousin configured voxalot on his Sipura2002. When he call my voxalot number at 777771@voxalot.com, he heard 1 ring then got the voicemail.

Following is voxalot setting on my SPA2002
SIP Port:5060
Proxy: us.voxalot.com
Outbound Proxy: us.voxalot.com
Use Outbound Proxy: yes
Use OB Proxy In Dialog: yes
Register: yes

Voxalot registration State shows Registered on SPA2002. UDP port 5060 has been forwarded to SPA2002 on the router.

Please help!

I logged into my voxalot account, changed the Ringing duration from 5 seconds to 27 seconds. then problem solved.