Quote:
Quote:
Quote:
Calls now appear in Call Monitor, but now my problem is at the end of the call setup sequence. I get dialtone but when I dial out, there is no ringtone, then dialtone reappears. I think it might be a dialplan problem. . . ataboy |
Quote:
If you are dialing the number correctly to match the dial plan, it should show both the number as you dialed and the trunk it picked, if in the Call Monitor table it shows the number, but no trunk picked, then there is a problem with the dial plan in PBXes. Keep in mind that you have to make sure you obey rules in your VoXalot premium account when dialing Also, pressing * at any time will get you a fresh dialtone, so you want to avoid that being part of the dialing sequence Pressing # after dialing a number sequence tells the system to try calling it without delay Hope you get running without too much trouble.... |
I had been testing the solution using +44 20 7100 6747 as the Sipbroker PSTN access number. As I said before, it returned me dialtone after I had dialled the destination number. After setting and resetting the PBXes settings, I tried it with Sipbroker PSTN access number +44 121 314 8447 and it worked first time!
I've double-checked it and it seems that my setup has a problem with +44 20 7100 6747. Could there be an issue with this number? ataboy |
Quote:
Looking at Call Monitor, it looks like PBXes does not receive all the digits I dial, it seems to pick some up, while miss others when using that access number.... I managed to get it to work at least once (I dialed the number to call really slowly, letting each tone finish before dialing the next), but even that time the call got cut off after the first ring.... The only thing I can think off is that the line for that number is having some sort of DTMF issue at least in relation to PBXes (it's odd since 44 121 314 8447 is also from Telappliant and that seems to work fine) If you need a London number, you can always set up your own, Orbtalk, Coms or Eutelia will let you have one for free. You can have PBXes point directly to the callthru gate, so all you have to do is enter the PIN and talk.... Hope that helps... and you get this in good shape before you have to travel |
Quote:
Quote:
Because the PBXes solution uses a 4-stage process: Sipbroker->Voxalot inbound->PIN->Voxalot outbound I use my 3102 for callthrough when I'm in the UK. However I find that the PSTN-VoIP gateway affects the speech quality and it would be handy to have a simpler PBXes/Voxalot solution. ataboy |
Quote:
In other words (1) set up a trunk for both inbound and outbound calling with OrbTalk (or SipGate, but personally I am more comfortable with OrbTalk in terms of reliability) then (2) under Inbound Routing point this trunk to the CallThru |
Quote:
ataboy |
I am also finding that pbxes is great for running a softphone on all my PCs and mobile devices at the same time on the same network as each sip phone is a different extension with it's own login my router handles it all ok. This also gives you the ability to dial out from a softphone too. Which leads me to my question -
How get a pbxes extension to pass a * prefix to my outgoing voxalot trunk so that I can dial the prefix for other networks. I just get invalid call tones I suppose I could put in a workaround and prefix with 00000 and then get voxalot to remove this and put a * in, but is there a way of keeping the * as though it was a voxalot extension? Sorry if it is slightly off topic but I figured that people with pbxes experience may be reading this thread. |
Quote:
There is no way to keep the *, as it has a special function on PBXes (it resets the line). See http://forum.voxalot.com/voxalot-sup...html#post12490 You can either do as you suggested in VoXalot, or do the routing in PBXes (see it won't let you dial *600 but it will let you dial 8600 for example and be configured within PBXes such that when an 8 is the first digit it is replaced by * and sent as such to VoXalot...) |
How would I add a * mid dialstring?
|
All times are GMT. The time now is 10:06 PM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.