Nokia N95 with Truphone and Voxalot, no OTA required.
Nokia 95 Setup
Okay, well with some help from Martin, dipac and others, I have a great working setup on my N95 Nokia! I can now use both Truphone and Voxalot without any OTA provisiong being required [other than whatever the Truphone application sets up]. Installed Truphone by sending an SMS with the word ‘Tru’ to +44 7624 000 000 and following the bouncing ball.... Got that working fine with my WLAN and mobile Internet connections [Three X-Series data plan on the road]. Installed the "sipvoipsettings.SIS" application as per this post by dipac Nokia Support Thread Using the new "SIP VoIP Settings" application: - VoIP Services [no entries] NAT firewall settings -> Domain parameters - added au.voxalot.com (did not touch truphone.com entry) STUN server name: stun.voxalot.com.au STUN server port: 3478 no other changes - NAT firewall settings -> IAP parameters [no entries] Added a "SIP settings" entry for Voxalot as follows: Profile name: VoXaLot Service profile: IETF Default access point: <for you to define> Public user name: sip:xxxxxx@us.voxalot.com <- where xxxxxx is user VoXaLot user name. If you want to use the Australian cluster set to sip:xxxxxx@au.voxalot.com and for Europe set sip:xxxxxx@eu.voxalot.com Use compression: No Registration: Always on Use security: No Proxy server: Proxy server address: sip:us.voxalot.com <- If you want to use the Australian cluster set to sip:au.voxalot.com and for Europe set sip:eu.voxalot.com Realm: None NB: Could not use "voxalot.com" User name: xxxxxx. <- where xxxxxx is user VoXaLot user name Password: <your VoXaLot password> Allow loose routing: Yes Transport type: UDP Port: 5060 Registrar server: Registrar server address: sip:us.voxalot.com <- If you want to use the Australian cluster set to sip:au.voxalot.com and for Europe set sip:eu.voxalot.com Realm: voxalot.com User name: xxxxxx. <- where xxxxxx is user VoXaLot user name Password: <your VoXaLot password> Transport type: UDP Port: 2060 NB: I could have just as easily used 5060 or one of the other ports that Voxalot allow though.. I chose Voxalot as my default profile... [don't think this is necessary, except for when adding like entries] Once the N95 is registered, to test inbounds from any other phone dial any of the SIP Broker access numbers found here: SIP Broker PSTN Numbers At the voice prompt, dial *010xxxxxx <- where xxxxxx is user VoXaLot user name You can also test using "Web callback" if you have a Vox Premium account. Your N95 should ring. Optional Extra customization of N95: Settings -> General -> Personalisation -> Standby mode Shortcuts: Left selection key: Internet telephone Right selection key: Conn. manager Active standby apps: Shortcut 1: Contacts Shortcut 2: Bluetooth Shortcut 3: Settings Shortcut 4: Web Shortcut 5: GPS data Shortcut 6: Maps Now, I can:
Using the standby apps, I can quickly turn on or off bluetooth and get to other settings. Other notes.
How does all this benefit me the most? My SIPME account has a DID and it is "SIP Registered"; calls to my 1300 number go to this DID (as a local call termination) and I can answer it anywhere that I have an active Voxalot registered device -- now including my mobile! Of course with the Voxalot setup, I can use my normal dial plan entries whilst on the road. Another bonus of Truphone, is that I can call plenty of locations for 'free' until at least the end of the year including all fixed line phones in Australia, the US (plus US mobiles) and the UK. |
Looks like a great candidate for the Wiki if your game ;)
faq.voxalot.com . |
Quote:
Nokia Configuration Settings - Voxalot FAQ Hopefully the wiki entry is more clean and a better guide. Kind Regards AndrewM |
For non-N95 owners, you may want to change the Codec order for Phones with limited uplink bandwidth.
The default is: i. AMR NB ii. PCMU (G.711 μ-law) iii. PCMA (G.711 A-law) iv. iLBC v. G.729 vi. Comfort Noise for PCMU and PCMA (not a separate codec, but handled as such) You can also change this using the SIP VoIP Settings Application Note: Nokia claims that the application should work on all S60 Devices |
All times are GMT. The time now is 05:48 AM. |
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.